SeaDoo GS Provozní pokyny Strana 51

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 100
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 50
49
Carburetor-Equipped Models
Cold Engine
The choke is provided to supply a rich-
er fuel/air mixture when starting a cold
engine.
Fully pull the choke lever and hold
while starting the engine.
TYPICAL
1. Fully pulled
After engine is started, release choke
lever.
It may be necessary to reapply the
choke lever and if necessary, slightly
apply throttle to keep engine running.
Warm Engine
The choke does not need to be applied
and throttle lever has to be slightly de-
pressed.
RFI Models
Cold and Warm Engine
Do not depress the throttle lever to
start either a cold or warm engine.
Riding
All Models
Slowly accelerate to reach deeper wa-
ter. Do not apply full throttle until the
engine is warm.
CAUTION: Avoid watercraft opera-
tion in weeded areas. If unavoid-
able, vary watercraft speed.
Rough Water or Poor
Visibility Operation
Avoid operation in these conditions. If
you should do so, proceed with cau-
tion and prudence using minimum
speed.
Crossing Waves
Reduce speed.
Always be prepared to steer and bal-
ance as necessary.
When crossing wakes, always keep a
safe distance from craft ahead.
F02L3JY
1
WARNING
When crossing wakes, slow down.
Operator and passenger(s) can
brace themselves by posting. Do
not jump waves or wakes.
F07A0DY
smo2001-002a.book Page 49 Wednesday, June 7, 2000 3:57 PM
www.SeaDooManuals.net
Zobrazit stránku 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 99 100

Komentáře k této Příručce

Žádné komentáře