SeaDoo GSI Provozní pokyny Strana 72

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 105
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 71
70
All Models
Using a grease gun, carefully lubricate
PTO flywheel at grease fitting until
boot is just beginning to expand.
1. Grease PTO flywheel
Secure PTO flywheel guard.
On SP Series, reinstall vent tube sup-
port.
Anticorrosion Protection
Throttle/Choke Cables
Lubricate the throttle and choke ca-
bles with BOMBARDIER LUBE lubri-
cant every 25 hours (or every 10 hours
in salt water use).
NOTE: A cable luber can be used
on cable end to inject BOMBAR-
DIER LUBE lubricant.
Electrical Connections
As necessary, apply anticorrosion
product such as dielectric grease on
battery posts and all exposed cable
connectors.
Additional Lubrication
BOMBARDIER LUBE lubricant will
help to prevent corrosion and keep
proper operation of moving mecha-
nisms.
Lubrication of the following items
should be performed every 50 hours
in fresh water use but every 10 hours
in salt water use.
Choke Lever
Fully pull choke lever and lubricate the
metallic portion.
Seat Opening Mechanism, Tab,
Hook and Lock Pin (Except HX/XP)
1. Front tab
2. Rear mechanism
TYPICAL
-
CAUTION
Immediately stop lubricating as
soon as boot begins to expand to
prevent boot damage or slipping.
F01I0BY
1
'
F01L7UY
2
1
START
STOP
F01L51Y
smo9701a.bk : smo9701b.fm5 Page 70 Monday, November 3, 1997 9:54 AM
www.SeaDooManuals.net
Zobrazit stránku 71
1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 104 105

Komentáře k této Příručce

Žádné komentáře