SeaDoo GTX RFI Uživatelský manuál stáhnout pdf

Engine Removal / Installation

Sea-Doo 800 RFI

Step 1

Battery and Seat Brace Removal

1.1 (Above) Remove the two retaining

straps, disconnect the battery and remove it

from the hull. Disconnect the negative

(black) cable first, then the positive (red).

1.2 (Below) (GTX HULL) Remove the 4

bolts securing the seat brace with a 10mm

socket. Disconnect the spark plug wires.

Disconnect the two quick connects to the

coil. Remove the seat brace.

Step 2

Intake Removal

2.1 (Below) Disconnect the head temp

sensor wire, head cooling lines, and the

lines to the rave valves.

2.2 (Below) Remove the air silencer cover

by sliding the 6 tabs off and pulling the

cover up and out.

2.3 (Below) Remove the six allen head

bolts from the flame arrestor bracket.

Remove the bracket, air silencer base and

flame arrestor. Remove the two allen head

bolts from the head pipe brace.

2.4 (Below)Remove the four bolts securing

the flame arrestor base to the throttle body.

Remove the base.

2.5 (Below) Remove the throttle and oil

pump cables from the throttle body with a

10mm wrench. Remove the three quick

connects from the sensors on the throttle

body.

1 2 3 4 5 6 7 8 9 10

Sea-Doo 800 RFI 1

Shrnutí obsahu

Strany 1 - Sea-Doo 800 RFI

Engine Removal / Installation Sea-Doo 800 RFI v 1.1 © 200

Strany 2

Strany 3

Strany 4

Strany 5

Strany 6

Engine Removal / Installation Sea-Doo 800 RFI 5.4 (Below) Remove the two 10mm bolts securing the fuel rail to the cylinders. Remove the rail and c

Strany 7

Strany 8

Strany 9

Strany 10

Engine Removal / Installation Sea-Doo 800 RFI v 1.1 © 200

Komentáře k této Příručce

Žádné komentáře

SeaDoo GTX RFI Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Motor SeaDoo GTX RFI. Engine Removal / Installation Sea-Doo 800 RFI Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Motor SeaDoo GTX RFI